Whenever you feel you cannot handle the rising summer heat, you should look into installing a cooling system. No need to be uncertain about the installation of an air conditioner because you have a lot of options to select from. Be aware of the fact that air conditioners of the latest version are more advanced, energy saving and less noisy. The electrical bills will be less since the air conditioners do not use a lot of energy. Firstly, know the appropriate air conditioning size that suits your house. A small cooling system will not be appropriate for your homes needs and one that is too big will cause the air to be clammy due to high humidity. This is obviously not a good experience. The unit of measure for a cooling systems capacity is tons. The amount of heat that is emitted by the air conditioner in an hour is measured in tons.
A one ton air conditioner will discharge 12,000 BTU and one that is 3- ton will emit 36,000 BTU. A ton of ice can be melted with 12,000 BTU and it takes 24hours, this is the idea behind tonnage measurement. For instance, a house that is 1600 square feet can be sufficiently served by a cooling system of 2 and a 1/2 tons. A qualified contractor is capable of selecting the right air conditioner that will suit your needs. The installation process has its own needs that have to be met. For a first time air conditioner instalment, the electrical panel must be upgraded with a new circuit breaker. Moreover, fresh wiring through the foundation will need to be done. New ductwork and mounting of the conditioner on metal brackets or concrete slab will be needed.
Only qualified contractors are needed to accomplish this task as they have the expertise. It can be dangerous to do it yourself and you will even waste time. It is very likely that you will be hurt when you do it yourself. A professional contractor is the one who should do this work because it is sensitive. Appropriate installation of the air conditioning system is important as it will guarantee durability and its efficiency. Make sure you take this seriously. Make sure that you analyze the abilities of the contractor so that you know if they can handle installation and system support.
Getting Down To Basics with Businesses
Through references of people and online websites, you can get a professional contractor. Confirm with your provincial authority whether the contractor has been legally licensed. Getting Down To Basics with Businesses